Ultra-tekTagline Logo.png
Jgsm 4v ER_7026 ps1 copy.jpg

The Ultra-Tek GSM4G™

When remoteness, difficult access or safety make it difficult to retrieve information from a test point and there is no lan of wifi, the Ultra-Tek GSM4G™ is the solution.

The Ultra-Tek GSM4G™

Review the condition of remote or hard-to-reach equipment from a mobile phone

The Ultra-Tek GSM4G™ unit will send an SMS to a linked mobile phone as soon as the equipment reaches a predetermined trigger point.

The user can then dial back to the GSM4G™ unit and view real time data on the equipment.

The signal can be live streamed and used for analysis in the UE SPECTRALYZER™ Special Analysis software for diagnosis

paragraph. Click here to add your own text and edit me. It's easy.

The Ultra-Tek GSM4G™ unit uses a standard phone sim card and a UE Systems Ultra-Trak 750™ Ultrasound sensor providing 24/7 real time information.  The trigger points can be remotely set and altered by sending an SMS instruction to the unit. The user can dial in at any time to see real time information on the performance of the equipment.  Each unit is PIN protected and multiple phones can dial in to see live data, if PIN is included.   

The Ultra-Tek GSM4G™ unit  can be permanently fixed to the equipment and can operate, using either 24VDC or 240 VAC power.

A Mobile phone signal is needed and the system can use either a 4G or 3G signal. 

The unit is fixed in an IP68 weather proof container

The Ultra-Tek GSM4G™ unit can be used for the following  Ultrasound readings:


     · Lack of  lubrication in bearings          

     · Micro damage in bearings 

     · Overloading of a bearing 

     · Failure of a bearing


     Steam Systems

     · Steam trap condition



     · Cavitation in pumps

     · Overloading in pumps

     · Condition of pump barrels


     · Passing Valves

     · Isolations

Product Brochure